Kale 9mm and 12mm bandwidth clamps. Manufactured in Europe in accordance with DIN 3017 standards. Five material options from mild steel to high grade stainless steel. Unique compact housing and screw design. Burr free rounded band edges. 7mm hex screw across all sizes. High clamping force, low tightening torque. One piece mechanically locked housing.

Kale Assortments available in four material types. Popular clamp sizes ranging from 8-12mm to 40-60mm packed in tough, impact resistant cases. Suits vans, workshops and maintenance services.

Flexidriver for Kale Worm Drive Clamps with flexible shaft and 7mm hex.

Kale 12mm bandwidth clamps with integrated spring system provides dynamic capacity to compensate for temperature and pressure changes in systems. Suits multiple applications including charged air and high temperature silicone hoses. Unique compact housing and screw design. Manufactured in Europe. Burr free rounded band edges. 7mm hex screw across all sizes. High clamping force, low tightening torque. One piece mechanically locked housing.

Kale Spring Tension Clamps provide constant clamping force generated through a convex spring washer system. Features an additional band liner to protect hoses from damage. 16mm bandwidth, 10mm hex head. Sizes from 25 to 194mm. Ideal for silicone hoses where high temperatures and pressures exist.

Kale Heavy Duty T-Bolt Clamps deliver high clamping force over 360 degrees. Deep three point welds with high strength bridge. Solid screw trunnions for extra strength and thread length. Burr free convex band edges. Sizes from 17 to 252mm. Two material options - W2 (semi stainless steel) and W4 (all stainless steel).

Kale P-Clips are manufactured in Europe in accordance with DIN 3017 standards. Material options include mild steel and stainless steel. Features include reinforced band ends for extra strength at the mounting point and EPDM rubber lined with soft band edges. Bandwidths of 15 or 20 mm with bolt hole sizes of 6.4 or 8.4mm.

Kale P-Clip Assortments are available in two material types - mild steel and stainless steel. Assortments include popular P-Clip sizes ranging from 6 to 30mm, packed in tough, impact resistant cases. Suits vans, workshops and maintenance services.

Kale Single Ear SE Clamps are designed to provide full contact to hoses and fittings on assembly. All stainless steel W4 (304) for high corrosion resistance. Simple crimp assembly. Mechanically locked band with centre internal tongue. Burr free convex band edges. Sizes range from 6.8 - 71.9mm.

Kale Single Ear SE Assortment includes 200 clamps in popular sizes ranging from 9.4 - 27.1mm, packed in a tough, impact resistant case. Suits vans, workshops and maintenance services.

Kale Endless Band System makes clamps quickly and simply. Quick lock housing and throw back screw design. Band supplied in easy reel plastic case. Burr free rounded band edges. 9mm wide stainless steel band with mild steel zinc plated housing and screw.

Spring band clamps are self-tensioning elements offering a high level of flexibility which constantly adjusting to different characteristics of a joint. Spring band clamps offer constant clamping force and ensure leak free sealing. Available in various configurations. Sizes ranging from 9mm to 70mm. Contact us for range information.

Global PVC P-Clips feature heavy duty gal construction. Bandwidths of 19 or 25mm with bolt hole sizes of 10 or 13mm. Thick PVC lining designed to provide maximum protection in demanding applications such as construction equipment and mining.

Global PVC Assortment include popular PVC P-Clip sizes ranging from 6 to 38mm packed in tough, impact resistant cases. Suits vans, workshops and maintenance services.

Global 2 Ear Crimp Clamps W1 Mild Steel. Simple to assemble. Clamp sizes ranging 5-7mm to 22-25mm. Suitable for low pressure hoses.

Global 2 Ear Clamp Assortment includes 200 clamps in popular sizes ranging from 7 - 25mm packed in a tough, impact resistant case. Suits vans, workshops and maintenance services.

Global Quick Release Clamps, all stainless steel W4 (304), 12.7mm bandwidth. Throw back pivoted screw allows easy assembly by pulling the band through to the desired diameter. High clamping force. Diameter range 52 to 312mm.

Global Rapid range designed to join EN877 cast iron pipe systems. Available to suit sizes 50 to 200mm in semi stainless steel W2, or 50 to 300mm in all stainless steel W5 (316). Single bolt, rapid assembly, provides axial restraint to prevent pipes pulling apart. Also suits poly pipe dimensions.

Global Flexible Duct Support System has been designed to provide perfect support for ducting in HVAC applications. Assembly in less than a minute. Meets all requirements of AS4254-1 standards. Support manufactured with fire retardant material according to UL94 requirements. Provides contact to >25% of duct diameters up to 600mm.

Caillau CLIC-R Clamps are European manufactured, W4 (304) all stainless steel. Positive locking. Burr free rounded band edges. Built-in compensation loops provide high clamping force and elasticity. Colour coded for size identification. Sizes ranging from 11 to 38mm. Suited to all common drip line tube sizes. Easy use assembly tool with soft hand grips.

Bandimex from Germany. Banding with full rounded edges. 30 metre coils and buckles to suit. Superior materials in stainless steel (301) and high grade (316) stainless steel. Includes jumbo band for heavy duty applications.

Bandimex preformed clamps for quick and efficient assembly. Suitable for lay flat and reinforced industrial hose assemblies. All stainless material, low profile buckles. Sizes from 25mm to 180mm.

Bandimex assembly tensioning tools for both standard and heavy duty banding systems. Adapters for assembly of preformed clamps. Air tools for precision assembly available on request. Band cutters and spares.

Raindrop Tank Fittings and Gaskets range. All stainless steel W5 (316) outlets and elbows up to 100mm (4"). Aluminium 100mm (4") tank overflow. Gaskets suitable for both flat and corrugated tanks.

Raindrop heavy duty float valves available in glass filled nylon or all stainless steel W5 (316) construction. All stainless steel version designed to resist corrosion in severe conditions common in both the Agriculture and Mining industries. Sizes range from 3/4" to 3". Capable of pressures up to 90PSI (700kpa). Floats available in polystyrene and polypropylene from 6" to 13".

Raindrop Floating Foot Valve (side entry) is manufactured in high quality bronze and available in 40mm and 50mm sizes. Simple solution to ensure suction lines do not lose prime, whilst avoiding sucking dirt and sludge from the bottom of a dam or tank. Supplied with 2 x 7" floats assembled ready to use.

Raindrop Scupper Vents and Seal Kits are ideal for boats, RVs and caravans. Manufactured in cast aluminium with spring loaded doors. Available in two sizes, in raw or powder coated white.

JTL Spectrum valves are available in a range of sizes from 15mm to 50mm. Manufactured from Glass Reinforced Polypropylene, PTFE seats and seals of two different materials (FKM and EPDM Thermoplastic Elastomer), these valves offer excellent chemical resistance. They have also attained AS/NZS 4020:2018 approval for use with potable and non potable water (a lilac handle option is available), are vacuum tested in accordance with AS3688 and are UV stabilised and corrosion resistant.